Copper-nickel wire from Russia

Heating cables, self-regulating KSTM brand, with two conductive stranded conductors of copper nickel-plated wires, 1.1 mm² conductor cross-section, semiconducting and sheath made of insulation thermoplastic

Power cable, flame retardant when laid in a group according to category A, with a round copper multi-wire conductor, with XLPE insulation, with an outer sheath made of cold-resistant polyvinyl chloride

Bare copper flexible wires

Special cables for cathodic protection, with copper, multi-wire conductor. For a voltage of 0.6 1 kV. With high molecular weight polyethylene insulation

Copper winding wires, subdivided with paper insulation,

Silver-copper solder wire for orthopedic dentistry PSrMTs-3742 - Stomatech according to TU 9391-006- 49546511-2004

Heat-resistant winding wires, intended for use in impregnated or compounded windings of electric motors and other electrical products, with a conductive core: nickel-plated copper

Hook-up wires with conductors of copper or tinned copper wires, insulated with PVC compound, including shielded ones, with the number of conductors from 1 to 3, with a cross-section of 0.08 mm2 to 2.5 mm2 at a nominal vo

Flexible wires with insulation and sheath made of PVC compound, with twisted copper or tin-plated copper conductors with a cross section from 0.75 mm2 to 2.50 mm2, in quantities from 2 to 5, for voltage up to 380 V d

Uninsulated wires for overhead power lines made of aluminum or copper wires

Field communication wire, with two cores of copper and steel wires, with a nominal diameter of 0.9 mm, with polyethylene insulation

Earthing cable type UX with one copper conductor cross-section from 1.5 mm² to 630 mm², multi-wire, with one wire per core, in a protective sheath made of halogen-free platicate (SHF2 ), rated voltage d

Single-core wires with copper conductor, with PVC compound insulation for electrical installations for rated voltage up to 450750 V inclusive of brands: PuV, PuGV. TU 16-705.501-2010 Wires and cables with iso

Installation wire, flame retardant, with a conductive core made of tinned copper wires, with continuous insulation made of thermoplastic compositions that do not contain halogens,

Wires intended for use at a rated voltage of not more than 500 Volts AC and (or) DC: wires for electrical installations with copper conductors, with PVC insulation and sheath

Wires and cords intended for use at a rated voltage of not more than 380 Volts: wires , cords with copper conductors, flexible, with insulation and sheath made of polyvinyl chloride plastic,

polyethylene bags for packaging, transportation and storage of copper sulfate and nickel sulfate weighing up to 25 kg

Wires with copper core, low fire hazard PVC insulation, without sheath, flame retardant, with low smoke and gas emission, for voltages up to 450/750 V inclusive, cross-section

Wires with a copper core, with PVC insulation of low fire hazard, without a sheath, not spreading combustion, with low smoke and gas emission, for voltages up to 450/750 V inclusive, num

Connecting wires and cords at nominal voltage up to 450/750 V, with parallel and twisted copper conductors, number from 1 to 5, cross-section from 0.5-6 sq.mm, with sheath and insulation made of PVC compound

Wires and cords with insulated flexible copper conductors, flame retardant, for connecting appliances for household and similar use to the electrical network at the nominal AC voltage up to 380/660

Installation wires for voltage 450/750 V inclusive of alternating current with frequency up to 400 Hz, or direct current voltage of 1000 V inclusive, with copper conductors with a cross-section of 0.5 to 70 mm2, with PVC

Copper wires veins, with PVC compound insulation,

Wire for electrical installations, with copper core, with insulation made of a polymer composition that does not contain halogens, with a conductor cross-section from 1.5 mm² to 400 mm²,

Wire with copper cores with PVC insulation and sheath for rated voltage up to 380 V, grade: PVSU, number of cores from the series: (2; 3; 4; 5), section with 4 , 0mm² by 10.0mm² inclusive,

Cross station wire, with copper cores, number of cores from 2 to 4, nominal core diameter 0.4 mm and 0.5 mm, PVC insulation, voltage up to 120 V,

Wires for electrical installations, with a copper conductive core with a nominal cross-section of 0.5 mm² to 400 mm² inclusive , with the number of current-carrying conductors from 1 to 3 inclusive, with PVC compound ins

Wires for electrical installations, single-core, with copper core, PVC-insulated, without sheath, core cross-section from 1.5 mm2 to 50 mm2, for voltage up to 450/750 V

Copper round enameled wire with temperature index 155 PET grade 155

WIRES WITH COPPER CONDUCTORS WITH POLYVINYL CHLORIDE INSULATION AND BRAIDING OF SYNTHETIC THREADS for voltage 450/750 V

Wires for electrical installations, with the number of copper conductors from the range 1,2,3 with a nominal cross-section from 0.50 to 50 mm², with PVC insulation, including reduced fire hazard, at rated voltage

Copper wires, non-insulated for overhead power lines

Single-core wire with copper core, PVC-insulated, flame retardant when laid in a group, with reduced smoke and gas emission, without sheath, conductor cross-section from 0 , 5 mm² to 400 mm²

Electric wire without connectors, with copper conductors with a diameter of 0.644 mm, for a voltage of 600 Volts, in plastic insulation, not fire-resistant

Electric wires, bargaining new brand "TDM ELECTRIC", for rated voltage up to 450 / 750V, with copper conductors insulated and sheathed from polyvinylchloride compounds, braided from polyester threads, number of conductor

Wires with twisted stranded copper conductors, with the number of cores: 2.3,4,5, cross-section from 0.75 to 2.5 sq. mm, polyvinyl chloride insulation and sheath, for voltage 380/660 V

Heat-resistant wires with copper stranded conductors with a nominal cross-section of 0.50 to 25 mm², insulated and / or sheathed in silicone rubber, flame retardant, bundle twists with the number of cores 1-5, on

Installation wires with copper conductors, flame retardant, conductor cross-section from 0.5 sq. mm up to 400 sq. mm inclusive for AC voltage 450/750 V with insulation and sheath made of PVC compound

Wires, cables and cords with insulation and sheath made of PVC compound, for rated alternating voltage up to 750 V, with copper conductors in the amount of 1 to 5, cross-section from 0.5 to 400 mm2, grades

Copper Wire for Branches of Transformer Windings

Flexible wire with twisted copper conductors, with the number of cores from 2 to 5 and the nominal cross-section from 0.75 mm2 to 6 mm2, with insulation and sheath made of PVC compound of low fire hazard, does not spread

Power cables, including flame retardant ones, with copper or aluminum conductors, with armor made of galvanized steel wires or tapes, or without armor, with or without a common screen, for nominal alternating voltage

Wires and cords with copper conductors, with PVC plastic compound insulation and sheath, with the number of cores from 2 to 5, various sections, grades PVA , ШВВП, ШВП

Flat power wires with copper cores with PVC insulation and sheath, intended for stationary laying in lighting and power networks, for installation and connecting devices to the pe

Copper stranded conductor wire horse insulation, for rated voltage up to 150V

Connectors and contact elements for wires and cables for voltages up to 1000V: crimped copper tip

Power wires with copper conductors, for voltage 250V with insulation and a roll of PVC compound with the number of veins from 2 to 3

Flexible wires with copper core, with flame retardant insulation

Wires and cords with insulated flexible copper conductors, flame retardant, for connecting appliances for household and similar use to the electrical network at the nominal AC voltage up to 380/660

Wires with copper conductors with polyethylene insulation for blasting operations

Wires and cords with copper conductors, flexible, number of cores from 2 to 5, cross-section of cores from 0.50 mm² to 6.0 mm², for rated AC voltage 300V, for systems 300 500V, with PVC insulation and sheath

Connecting wires and cords for AC voltage up to 0.38 kW, with parallel or twisted copper conductors, with the number of conductors from 1 to 5, cross-section from 0.5 mm² to 10 mm²,

Single-core wires for electrical installations, with copper core, PVC-compound insulation, without sheath, with core cross-section from 1.5 mm² to 50 mm² , for voltage up to 450750 V,

Power cables for rated voltage 0.66 and 1.0 kV with aluminum or copper conductors, with XLPE insulation, armor made of galvanized steel wires, protective hose made of polyethylene grades APvKShp, PvKShp,

Single-core wires with copper core, insulated from PVC compound for electrical installations,

Wire for electrical installations, flame retardant, single core, with copper residential, insulated with PVC compound, without sheath, with a cross-section of 1.5 mm² to 10 mm²,

Wires with copper conductors, conductive cores, polyvinyl chloride insulation, in a normal PVC sheath

Copper wires, PVC insulation fire hazard, without a sheath, flame retardant, with low smoke and gas emission, for voltage up to 450750 V inclusive, cross section

Wires and cords of general purpose, assembly and household with copper conductors with polyvinyl chloride insulation and sheath, designed for connecting electrical machines and devices to the electrical network with rate

Wires with copper conductors and PVC insulation with a nominal cross-section of a conductor from 0.5 mm2 to 95 mm2, used for electrical installations with stationary laying in lighting and power networks, as well as for