Russian export of foam insulation:
Manufacturers of Russian Foam insulation wholesale:
Foam insulation manufacturing companies you many buy this products:
Industrial pipe fittings: ball valves in polyurethane foam insulation with a protective shell, ball valves with an air vent with thermal insulation made of polyurethane foam with a protective shell,
Mens boots made of synthetic textile material with water-repellent finishing doubled with non-woven synthetic fabric and polyurethane foam, insulated with an insert made of multilayer insulation, on a stitched fabric
Detectors of damage to polyurethane foam insulation of pipelines types
Extrusion polystyrene foam insulation boards tm. LIDER PLAST® (types: Leader Plast 35, Leader Plast 45). Thickness from 20 mm to 80 mm.
Two-component polyurethane foam insulation system TEPLO TS, with a density of 5 to 130 kg m3, with the addition of fire retardants in component A, manufactured according to TU 2254 - 001 - 49974662 - 2015.
Three-layer metal wall panels with polyurethane foam insulation, 60-150 mm thick, the Kontur MP trademark. Produced according to TU 5284-001-80699250-2007
Polystyrene foam insulation boards,
Pipeline heating main No. 4 on Tavricheskaya street from 4S43 to 4K17 in polyurethane foam insulation; maximum diameter 630 × 10.0 mm, maximum allowable working pressure 1.6 MPa, temperature 15070 ºС, pipeline category
Pipeline of heating networks PNS-5a in polyurethane foam insulation and mineral wool (at the exit from the ground, input to PNS) for superheated water in the section from TK-III-V-46 to PNS-5a and from PNS-5a up to ТК-II
section of the heating network pipeline located at the address, st. Zinkovaya, object Reconstruction of 4 t m ChGRES TK17-TK21 at Tsinkovaya street, Du800 700, Lk = 54386 in polyurethane foam insulation, Chelyabins
Equipment operating under overpressure: The pipeline of the heating network section along Lenin Street from chamber 5S15 to pavilion 5P4 in polyurethane foam insulation 2Du500 mm L = 882 m (in two-pipe calculation), nomi
Insulating materials made of foamed polystyrene foam: foam polystyrene heat-insulating plates,
Heat and sound insulating products made of foamed polyethylene marked Polyizol, types: A, B based on polyethylene foam with one-sided and double-sided foil; C based on polyethylene foam with one-sided
Parts and elements of pipelines operating under excess pressure: steel pipes and fittings with thermal insulation made of polyurethane foam with a protective sheath, type MOEK: polyurethane foam pipes, pipes reinforced w
Thermal noise insulating materials made of foamed polyethylene foam with an additional layer of polymer-bitumen composition or without: TermoEshumo, TermIzol ThermoShumoIzol B NPE, ThermoShumoIzol B PPE, density from
Insulating material made of foamed polyethylene foam 0.2-10.0 mm thick in rolls, 0.2-10.0 mm thick in slabs 0.1-10.0 thick mm in bundles
Steel heating pipeline with thermal insulation made of foamed polyurethane foam in a polyethylene sheath (St426х7.0-1-PPU-PE) from the District boiler house Gorki to the boundaries of land plots of objects 9-24 -store
Insulating material three layered of two layers of polyethylene film with a sound-insulating middle layer of granular polystyrene foam: substrate for floor coverings, 3.0 mm thick, in rolls 1100 mm wide
Elements for equipment operating under overpressure categories 1 and 2 with polymineral foam thermal insulation, or highly filled polyurea thermal insulation , types according to Appendix No. 1
Industrial pipeline fittings: ball valves (insulated ball valves in thermal insulation made of polyurethane foam with a protective sheath) trade mark ZFI
Elements of the pipeline operating under overpressure of the 1st and 2nd categories: Steel pipes and fittings with thermal insulation of polyurethane foam in a waterproof sheath, type SKU
Steel pipes and fittings with thermal insulation made of polyurethane foam with protective a shell with a diameter of 325 to 1420 mm, with a wall thickness of 6 to 16 mm, belonging to the 1st category in accordance with
Thermal insulation foam polystyrene plates: PSB-S15; PSB-S25; PSB-S35; PSB-SF, tm. TEPLOX, GOST 15588-86.
Foam polystyrene thermal insulation plates with fire retardants, brands: PPS10, PPS12, PPS13, PPS14, PPS15, PPS15F, PPS16F, PPS17, PPS20, PPS25, PPS30, PPS30 PPS35, PPS40, PPS45, produced according to GOST 15588-2014
Connecting parts, piping assemblies, bent bends with external anti-corrosion coating and thermal insulation made of polyurethane foam in a protective sheath
Products made of foamed polyethylene (roll insulation), thickness from 2 mm to 10 mm,
Thermal insulation products made of polyethylene foam in the form of tubes and profiles of the brand ISOPOL, produced in accordance with GOST 56729-2015 (EN 14313: 2009 )
Elements for equipment operating under pressure, 1 and 2 categories with thermal insulation made of polyurethane foam with a sheath,
Steel shaped products with thermal insulation from polyurethane foam and waterproof coating, intended for liquids and used for working environments of group 2, 1 equipment category
Thermal insulation materials: urea foam
Heat and sound insulation, waterproofing products made of foamed polyethylene, brand Isolux: canvas type NPE, incl. laminated, mats of the NPE M type, incl. Laminated with a thickness of 0.5 - 60mm; pipe shells, type N
Thermal insulation product (Urea foam PENOIZOL), thickness from 50 mm to 100 mm, dimensions 2000x1000 mm, 1000x1000 mm, 1200x600 mm, density from 20 kg m3 to 35 kg m3
Foam polystyrene heat-insulating plates Teploutperimeter: Thermo, Optima, Terra, Carbon, thickness from 30 mm to 100 mm, density 15, 20, 25, 30, 35, 45 kg m2, manufactured according to TU 2244-001-96539364-2011.
Thermal insulation boards made of extruded polystyrene foam with or without facing or without them, mod .: ANGARA 30-35, ANGARA 35-40 , ANGARA 40-45, thickness from 30 mm to 50 mm.
Heat-, moisture-, sound-insulating products made of foamed polyethylene, series: MultiFlex and MultiFlex PE. Density 20-30 kg m3.
Thermal insulation material Ultrapet (foamed polyethylene laminated with a metallized polymer film), manufactured according to TU 2244-001-69514385-2011
Thermal insulation and waterproofing plates, strips, sheets, foamed rubber bands CR, SBR, EPDM, EVA (ethylene vinyl acetate) self-adhesive and ordinary ... Thickness from 1 mm to 40 mm
Insulation PPI TU 5768-020-12906390-2005 with rev. 1, 2 polyisocyanurate foam, density (45 ± 5) kg m³
Heat and sound insulating products made of foamed polyethylene: Stenoflex 400 Bundle, Stenophon 290, Stenofon 190-2, Stenofon 190 types A, B, B3, B2, C, C3, C2, D, manufactured according to TU 5767-002-09693619 -2012, no
Heat-insulating polystyrene foam plates with a thickness of 20 to 200 mm
Thermal insulation materials: boards of the trade marks Dryex, Dryex Silver type PSB-S based on expandable polystyrene foam grades: Top with a density of up to 15 kg m³; Facade with density up to 20 kg m³; Master
Heat-insulating materials: plates from extruded polystyrene foam Uniplex-XPS with a thickness of 20 to 120 mm, grades: 35 (density 30 - 35 kg m3), 45 (density 39 - 45 kg m3),
Pipeline fittings operating under excess pressure, 1 and 2 categories, working environments of groups 1 and 2, types PE, PE2, PE3, EP, PPU, OC, MP: steel pipes with thermal insulation made of polyurethane foam with prote
Steel pipes and fittings with thermal insulation made of polyurethane foam with a protective shell
Elements of pipelines that can withstand pressure, 1 and 2 categories, with thermal insulation made of polyurethane foam with a protective shell,
Elements of pipelines operating under overpressure, category 1 for liquids 2 groups of media: pipes and steel fittings with thermal insulation made of polyurethane foam with a protective sheath DN from 325 to 1420 mm, PN
Equipment elements (assembly units) withstanding pressure: Steel pipes and fittings with thermal insulation made of polyurethane foam with a protective sheath for liquids of group 2 (equipment category 1 according to TR
Casual shoes for adults with a thermoplastic elastomer (TEP) sole, polyurethane foam with a top made of genuine leather and suede, adhesive-stitched and molded fastening method, including insulated (natural, artificial
Pipeline elements operating under overpressure, categories 1 and 2: steel pipes with thermal insulation made of polyurethane foam in a protective sheath with the UEC system, maximum working pressure 1.6 MPa, maximum di
Steel pipes and fittings with thermal insulation made of polyurethane foam with a protective shell, with an outer diameter of 32 to 1420 mm, with a working pressure of no more than 1.6 MPa, belonging to the 1st category
Steel pipes and fittings with thermal insulation made of polyurethane foam with a protective shell, with a diameter of 219 to 1420 mm, belonging to the 1st category in accordance with Appendix No. 1 to TR CU 0322013 and
Elements of equipment (assembly units) 1 and 2 Categories in accordance with Appendix No. 1 to TR CU 0322013, withstanding pressure: steel pipes and steel fittings with thermal insulation made of polyurethane foam
Foam polystyrene thermal insulation boards with a fire retardant content of up to 5%, brands: PSB-S 15, PSB-S 15A, PSB-S 25, PSB-S 25 A , PSB-S 35 , PSB-S 35 A , PSB-S 50 , PSB-S 50 A , length from 500 to
Heat-insulating slabs made of rigid polyurethane foam with fire retardants PPU-45 with a density of 45.1 kg m3 manufactured according to TU 5768-002-0194464008 -2016.
Foam polystyrene plates for thermal insulation as the middle layer of building structures and industrial equipment of the brands: PPS10, PPS12, PPS13, PPS14, PPS15, PPS15F, PPS16F, PPS17, PPS20, PPS20 , PPS23, PPS25, PP
Foam polystyrene thermal insulation boards
Thermal insulating materials: polystyrene foam plates PSB-S-25, PSB-S-35
Foam polystyrene thermal insulation boards, thickness from 20 mm to 600 mm, density from 10 kg m3 to 45 kg m3
Heat-insulating material: high-pressure foamed polyethylene sheet TeploKent grades: NPE, NPE-F, NPE-L (thickness from 2mm to 15 mm) TU 2244-002-83379356-2012
Foam polystyrene heat-insulating plates grades: PPS10, PPS12, PPS13, PPS14, PPS16F, PPS17, PPS20, PPS23, PPS25, PPS30, PPS35, types P, types A, B, density from 10 kg m3 to 35 kg m3, thickness from 10 mm to 500 mm, is
Foam polystyrene thermal insulation boards
Foamed polystyrene heat-insulating plates, grades
Heat-insulating materials made of expanded polystyrene foam
Foam polystyrene thermal insulation boards
Heat-insulating materials made of expanded polystyrene foam
Thermal insulation materials made of extruded polystyrene foam
Heat-insulating materials made of expanded polystyrene foam
GOST 15588-2014 Foam polystyrene thermal insulation plates
Foamed polystyrene heat-insulating blocks and plates
Foam polystyrene insulating plates, thickness from 10 mm to 500 mm, density from 10 kg m3 to 358 kg m3, grades: PPS10, PPS12, PPS13, PPS14, PPS15F, PPS16F ”,“ PPS17 ”,“ PPS20 ”,“ PPS20F ”,“ PPS23 ”,“ PPS25
Foam polystyrene thermal insulation boards
Thermal insulation products made of foam glass
Foamed polystyrene heat-insulating plates, grades
Foam polystyrene thermal insulation boards
Thermal insulating materials made of foam glass
Thermal insulation boards made of expanded polystyrene foam
Foam polystyrene thermal insulation boards
Heat-insulating materials made of expanded polystyrene foam
Foam polystyrene thermal insulation boards
Insulating materials made of foamed expanded polystyrene,
Foam polystyrene thermal insulation boards
Foam polystyrene heat-insulating plates PPS16F-R
Insulating materials made of extruded polystyrene foam,
Foam polystyrene thermal insulation boards:
Thermal insulation materials made of extruded polystyrene foam
Thermal insulation materials from extruded polystyrene foam:
Thermal insulation materials made of expanded polystyrene foam:
Foam polystyrene thermal insulation boards
Foam polystyrene thermal insulation plates,
Thermal insulation materials made of expanded polystyrene foam: Polyfoam PSB S 15, PSB S 25 light,
Foam polystyrene thermal insulation boards
Foam polystyrene thermal insulation boards
Steel pipeline elements and fittings with thermal insulation made of polyurethane foam and a protective coating for heating networks (pipes and fittings according to Appendix B TU 4937-031-41989945-2011), nominal diamete
Thermal insulation products made of foam glass K-GLASS
Steel pipes and fittings with thermal insulation from polyurethane foam with a protective shell, with an outer diameter of 325 to 1420 mm, with a working pressure of no more than 1.6 MPa, 1st and 2nd category and intende
Foam polystyrene thermal insulation boards
Heat-insulating materials made of expanded polystyrene foam
Thermal and sound insulating boards based on polyisocyanurate foam with soft covers
Foamed polystyrene heat plates insulating, thickness from 20 to 500 mm, density from 10 to 45 kg m3, trade mark Irkutsk polyfoam, grades: PPS10, PPS12, PPS13, PPS14, PPS15, PPS17, PPS20, PPS23, PPS25, PPS30, PPS35, P
Foam polystyrene heat-insulating plates, grade PPS 13-R-A
Steel pipes and fittings with thermal insulation made of polyurethane foam with a protective sheath with a diameter of 32 to 1020 mm, with a wall thickness of 3 to 14 mm, related to 1, 2 categories in accordance with App
Foam polystyrene thermal insulation boards
Foamed polystyrene heat-insulating plates of grades: PPS10, PPS12, PPS13, PPS14, PPS16F, PPS17, PPS20, PPS23, PPS25, PPS35 type P type A or B
Foam polystyrene thermal insulation boards
Foam polystyrene thermal insulation boards
Thermal insulation foam polystyrene plates with the addition of fire retardant (5.5 -6.5% ), thickness from 10 to 500 mm, density from 9 to 45 kg m3, grades PPS10, PPS12, PPS13, PPS14, PPS15, PPS17, PPS20, PPS23, PPS25
metal panels with foam insulation type PTS
Three-layer panels of two metal sheets and foam insulation
Plates polystyrene foam insulation
metal panels with foam insulation type PTS
Metal panels with foam insulation
METAL PANELS WITH 3-LAYER STYRENE FOAM INSULATION FOR EXTERNAL WALLS AND COVERINGS
Plates polystyrene foam insulation
Foam polystyrene insulating plates
Insulating sheet made of foamed polyethylene laminated on one side with aluminum foil of the "PF" brand
Insulating materials made of foamed polyethylene: Types P, Subspecies PL, M.
Insulating materials based on foamed polyethylene
Insulating materials made of foamed polyethylene with foil
FOAM POLYSTYRENE HEAT INSULATING BOARDS. No. 0016010
Foam polystyrene heat-insulating plates A grade: 1) PPS 25-R-A-6000x1000x600 mm, 2) PPS 35-P-A-6000x1000x600 mm, 3) PPS 45-P-A- 6000x1000x600 mm
Insulating materials made of foamed polyethylene: Types P, Subvidu PL.
Insulating materials made of foamed polyethylene
We have large supplier & product base, Buyer safety measures, Best prices Logistics & quality inspection support, bulk Request for quote
Export to city | Date | Km |
---|---|---|
Novosibirsk (Russia) - Gəncə (Azerbaijan) | 07.2020 | 3113 |
Tokmok (Kyrgyzstan) - Regensburg (Germany) | 07.2020 | 4792 |
Andijon (Uzbekistan) - Khiwa (Uzbekistan) | 07.2020 | 1006 |
Qaraghandy (Kazakhstan) - Khorugh (Tajikistan) | 07.2020 | 1385 |