Russian export of insulated wire:
Manufacturers of Russian Insulated wire wholesale:
Insulated wire manufacturing companies you many buy this products:
Machines and installations for cleaning and straightening wires, for rewinding and applying body insulation on the stator coils of large electrical machines (KEM), for insulating wires and bandage rings of electrical mac
Self-supporting wires insulating bathtubs for overhead power lines for rated voltage 0.6 1 kV grades SIP-1, SIP-2, SIP-4. Self-supporting insulated wires for overhead power lines
Non-insulated wires with a conductive part of shaped wires for overhead power lines
Power wires for general purpose: self-supporting insulated wires, voltage 610 kV, 1220 kV, 2035 kV, article SAX-W-Tek ™
Wires intended for use at a rated voltage of no more than 500 AC and or DC: twisted PVC insulated wires, PVC sheathed, flexible
Plastic insulated wires with one aluminum alloy conductor cross section m from 2.5 mm2 to 16 mm2 for rated alternating voltage up to 450/750 V inclusive with a rated frequency of 400 Hz: - with insulation made of
Self-supporting insulated wire with insulated zero carrier core, combined with an optical cable, for overhead power lines for rated voltage up to 0.6 / 1 kV inclusive with rated frequency of 50 G
Fittings connecting and hanging for self-supporting insulated wires (SIP) trade mark "Ensto":
Non-insulated wires for overhead power lines of M and A brands
Cable fittings for voltage up to 1 kV. Connecting, termination and branch couplings for single-core and multicore cables with EPDM or polymer insulation, wire or tape
ASBESTOS INSULATED WIRES
PVC-insulated wires and low-flammability PVC sheath with 2 and 3 cores, copper conductor cross-section from 0.75 mm² to 6.0 mm² inclusive, for voltage 380V
Self-supporting insulated wires, protected for overhead power lines
Non-insulated wires for overhead power lines, brand M,
Clips connecting, branching and terminal for mounting self-supporting insulated wires SIP-1, SIP-2 (2A) , SIP-4, A, AS, AN
PVC-insulated wires
PVC insulated wires for electrical installations for voltage 450750 B
Couplings for single-core and multicore cables with plastic or rubber (including paper impregnated with a non-flowing composition) insulation, wire armor of voltage classes up to 1 kV. Branch type
Self-supporting insulated wires for overhead power lines for rated voltage up to 0.6 1 kV
Self-supporting insulated wires for overhead power lines for rated voltage up to 0.6 1 kV inclusive of brands: SIP-1, SIPt-1, SIP-2, SIPt-2, SIPt-4, SIP- 4, with a section from 16 to 240 mm2, number of cores from 2 d
Self-supporting insulated wires for overhead power lines for a rated voltage of 0.6 1 kV, manufacturing according to TU 3550-002-54516042-2007
Self-supporting insulated wires for overhead power lines
Cable products: PVC-insulated wires for electrical installations
Connecting armature for self-supporting insulated wires and cables up to 1kV tm. Ensto
ASBESTOS INSULATED WIRES
PVC-insulated wires
Self-supporting insulated wires without a carrying cable for rated voltage 0.6 1 kV inclusive, brand SIP-4S
Self-supporting insulated wires, flame retardant, for overhead power lines
Non-insulated wires for overhead power lines
Self-supporting insulated wires for overhead power lines for rated voltage up to 0.6 1 kV
Self-supporting insulated wires for overhead power lines
Self-supporting insulated wires for overhead power lines
Self-supporting insulated wires for overhead power lines, rated voltage 0.6 1 kV,
Self-supporting insulated wires for overhead power lines for rated voltage up to 0.6 1
Self-supporting insulated wires for overhead power lines for rated voltage up to 0.6 1 kV inclusive
Self-supporting insulated wires for overhead power lines for rated voltage 0.6 1 kV of SIP-1 brands , SIPg-1, SIP-2, SIPg-2, SIP-4, SIPg-4
Self-supporting insulated wires, with a number of cores from 1 to 6, with a nominal cross-section of phase conductors from 16 to 240 mm2, with a nominal cross-section of zero and carrier conductors from 25 to 150 mm2, fo
Self-supporting insulated wires for overhead power lines for rated voltage up to 0.6 1 kV inclusive
PVC insulated wires for electrical installations. PV1, PV1-KhL, PV2, PV2-KhL, PV3, PV3-KhL, PV4, PV4-KhL, APV, APV-KhL
power cables with XLPE insulation, wire armor, PVC or polyethylene sheath, for voltage 6, 10, 20 and 35 kV, with copper or aluminum round conductors, single-core
Fire alarm cables, fire-resistant, with single-wire conductive conductors of soft copper wire insulated with silicone rubber, with the number of pairs 1 ÷ 40 or insulated conductors in a bundle of 3 or 4
Flexible wires and cords with copper core, with insulation and sheath made of PVC compound for voltage up to 380V brands: wires
Armored heating cables, with 1, 2, 8, 10 or 12 heating oils lami made of aluminum or copper wire, insulated with propylene copolymer, reinforced with galvanized steel wire
Wire with aluminum conductors with PVC insulation, flat with two- and three-way separating base wired, with a nominal cross-section of a conductor from 2.0 to 6.0 mm2
Field communication wire, with two cores of copper and steel wires, with a nominal diameter of 0.9 mm, with polyethylene insulation
Hook-up wires with conductors of copper or tinned copper wires, insulated with PVC compound, including shielded ones, with the number of conductors from 1 to 3, with a cross-section of 0.08 mm2 to 2.5 mm2 at a nominal vo
Power cables with silanol-crosslinked polyethylene insulation, with armor made of aluminum wires or aluminum alloy wires, with a protective hose made of polyethylene with or without water-blocking elements on a nominal
Household assembly flat wires, with single-wire copper conductors, insulation and sheath made of PVC compound, with the number of conductors from 2 to 3, cross-section of conductors from 1.5 mm² to 4.0 mm², for rated vol
Wires and cords intended for use at a rated voltage of not more than 500 V AC and (or) DC: flexible wires with copper conductors, with insulation and sheath made of PVC compound
Wires intended for use at a rated voltage of not more than 500 Volts AC and (or) DC: wires for electrical installations with copper conductors, with PVC insulation and sheath
Flexible wires for voltages up to 380V with twisted cores in PVC insulation and PVC sheath and power cables with plastic insulation for rated voltage 0.66 kV, with the number of cores from 1 to 5 in the range
Wires for electrical installations, for rated alternating voltage up to 450/750 V inclusive, with copper conductors, insulated with PVC compound , and with PVC insulation lowered
Self-supporting insulated and protected wires for overhead power lines with a conductive core made of aluminum alloy, with a protective insulation made of light-stabilized cross-linked polyethylene for rated voltage
Cable products with copper conductors, PVC insulation, PVC insulation and sheath: wires for rated alternating voltage up to 450 750 V inclusive denomination
Twisted copper wire with polyvinyl chloride insulation , with a polyvinyl chloride sheath, flexible, for voltages up to 380 V, grade PVS; Cord with parallel copper conductors, with PVC insulation, with polyvinyl chloride
Wires and cords for rated voltage up to 450750 V in accordance with GOST 7399 -97; PVC-insulated cables for rated voltage up to 450750 V inclusive in accordance with GOST IEC 60227-1-2011; Cables with rubber insulation
Power cables with plastic insulation for rated voltage 0.66; 1 kV, with a single-wire copper conductor cross-section from 1.5 to 16.0 mm2, number of conductors from 1 to 5,
Wires with a copper core, with PVC insulation of low fire hazard, without a sheath, not spreading combustion, with low smoke and gas emission, for voltages up to 450/750 V inclusive, num
Self-supporting wires, insulated and protected for overhead power lines, at voltage voltage 0.6 / 1.0 kV,
Connecting wires and cords at nominal voltage up to 450/750 V, with parallel and twisted copper conductors, number from 1 to 5, cross-section from 0.5-6 sq.mm, with sheath and insulation made of PVC compound
Self-supporting insulated and protected wires for overhead power lines,
Copper wires with polyethylene insulation for industrial blasting operations, number of cores 1 and 2, nominal diameter 0 , 5, 0.7 and 0.8 mm
Wires and cords with insulated flexible copper conductors, flame retardant, for connecting appliances for household and similar use to the electrical network at the nominal AC voltage up to 380/660
Copper wires veins, with PVC compound insulation,
Wires and cords with polyvinyl chloride insulation and polyvinyl chloride sheath, flexible for rated voltage up to 380 / 660V
Wires and cords for rated voltage up to 450 / 750 V, grades: PVA (PVSn), number of cores from the row: (2; 3; 4; 5), cross-section from 0.75mm² to 2.5mm² inclusive, with insulation and sheath made of PVC compound, brands
insulated wires
Non-insulated wires for overhead power lines brands A, AC, M
PVC insulated wires for electric brands PV, AGV, PPV, APPV
Self-supporting insulated wires: 1 . SIP - 1st; 2. SIP - 2st; 3. SIP-4.
self-supporting insulated wires of the SIP-2, SIP-4 grades for a rated voltage of 0.6 / 1kV
PVC-insulated wires for electrical installations of the PPV brand
GENERAL CONTROL POSITION OF OPU SUBSTATION TRANSFORMER COMPLETE BLOCK TYPE KTPB-10000/110/6 U1 (PS "SAKHIL.") 1. Welding machine-60 pcs., 2. Table lamps with lampshade-288 pcs., 3. Insulated wires with connecting element
Self-supporting insulated wires for overhead power lines
PVC insulated wire for electrical installations
Self-supporting insulated wires of the SIP-2, SIP-4 brands for rated voltage up to 0.6 / 1.0kV
Non-insulated wires for overhead power lines ACSR / GA
Self-supporting insulated wire of the SIP-2, SIP-4 brands for a voltage of 0.6 / 1kV
Non-insulated wires
SELF-SUPPORTING INSULATED WIRES SIP-1 0,6 / 1,0 kV, SIP-3 20 kV and SIP-3 30 kV
1. Power cables with plastic insulation brand: 1.АВВГ; 2.AVVGng; 3. VVg4VVGng. 2. Household wires brand 1. PUNP; 2. PUGNP. 3. Wires for electrical installations of 1.APuV brand; 2. APuV-P.
round aluminum wires with enamel two-layer insulation. where * - numbers 1 or 2 (insulation class), 200 - temperature index of the wire (200 С), ** - nominal diameter of the wire (conductive core), in millimeters
Wiring accessories: pre-insulated
Wiring accessories: 10 mm pre-insulated pin lug, red
Wiring accessories: pin lug with preliminary insulation 1.5-2.5 mm,
Wire for field communication with polyethylene insulation P-274.
OTHER WIRES AND CABLES WITH INSULATED CONDUCTORS OVER 0.51 MM DIAMETER
We have large supplier & product base, Buyer safety measures, Best prices Logistics & quality inspection support, bulk Request for quote
Export to city | Date | Km |
---|---|---|
Taraz (Kazakhstan) - Gəncə (Azerbaijan) | 03.2020 | 2081 |
Tokmok (Kyrgyzstan) - Regensburg (Germany) | 03.2020 | 4792 |
Andijon (Uzbekistan) - Khiwa (Uzbekistan) | 03.2020 | 1006 |
Nur-Sultan (Kazakhstan) - Khorugh (Tajikistan) | 03.2020 | 792 |