Pipeline part from Russia

Standard and non-standard pipeline parts, flanges of connecting parts of pipelines of 1 and 2 categories for gases and vapors of group 1 (DN up to 350mm and PN up to 3.5 MPa; DN up to 100mm and PN over 3.5 MPa) and group

Welding units and pipeline parts: tees, elbows, transitions, bends, fittings, thermocouple pockets, lugs, plugs, pipeline connections with a ball nipple, elliptical plugs

Steel connecting pipeline parts: plugs, sealing rings, crosses, couplings, bends, transitions, tees, elbows, pipeline nodes, fittings, with a diameter of 10 mm to 1500 mm, for nominal pressure up to

Welding units and pipeline parts: tees, elbows, transitions, bends, fittings, thermocouple pockets, bosses, plugs, pipeline connections with a ball nipple, plugs elliptical.

Industrial pipeline fittings: pipeline parts of categories 1 and 2 operating under excess pressure from 0.1 MPa to 100 MPa,

Items of equipment of categories 1 and 2, intended for liquids and used for working environments of group 1 : pipeline parts (bends, transitions, tee) lined with fluoroplastics Dу from 50 to 80 millimeters PN 1.6

Pipeline parts operating under excess pressure 1 and 2 categories, types: (see Appendix No. 1)

Items of equipment operating under excess pressure: pipeline parts -

Equipment elements that can withstand pressure - seamless welded pipeline parts made of low-alloy carbon, stainless and corrosion-resistant steel:

Assembly units and seamless and welded steel connecting pipeline parts, equipment items

Titanium welded pipeline parts:

Elements of equipment and pipeline parts connecting seamless steel and welded category 3 in accordance with Appendix No. 1 of TR CU 032/2013: flanges, plugs, bends, transitions, tees.

Equipment operating under overpressure of 1- 2 categories , working environment of group 1: pipes and pipeline parts (tees, crosses, elbows, transitions) made of fluoroplastics in steel armor with free and or welded

Steel pipeline parts, operating under excess pressure, category 3: bends 90 degrees 426x5, material - steel 12X18H10T (drawing No. K G03-75.00.00); elbows 90 degrees 630x5, material - steel 12X18H10T (drawing No. K

Pipeline parts operating under excess pressure: flange connections, type KFS-150

Elements of equipment and pipeline parts connecting steel seamless and welded 3 categories, designed for gases and vapors of working media 1, 2, for liquids of workers environments of group 1 in accordance with Appendix

Seamless steel pipeline parts 3 categories:

Equipment elements ( assembly units) that can withstand pressure: seamless welded steel pipeline parts, not welded, categories 1 and 2, designed for for liquids, working media of groups 1 and 2, having

Steel assembly units and pipeline parts: transitions , tees, elbows with a nominal diameter of up to 100 mm for working pressure for medium gas up to 100.0 MPa, for medium liquid up to 50.0 MPa, medium group

Pipeline parts operating under overpressure of 1 and 2 categories,

Elements for equipment of categories 1 and 2, working under excess pressure: pipeline parts

Items of equipment (assembly units) and accessories to it categories 1 and 2, withstanding pressure, used for the working environment of group 2 and intended for gases and vapors: pipeline parts ( branch

Steel pipeline parts, operating under overpressure, categories 1 and 2 for working environments of group 2:

Seamless welded pipeline parts made of carbon and low-alloy steel, operating under overpressure category 1, 2 intended for liquids of 1 and 2 groups of media, diameter over 25 to 2400 mm, pressure c

Seamless welded pipeline parts made of carbon and low-alloy steel according to the appendix (see appendix 1 on 1 sheet)

Items of equipment (sub-assemblies), pressure effect: pipeline parts steel seamless welded, not welded categories 1 and 2 of the NG-Magistral brand, intended for gases and used

Welded steel pipeline parts

Pipeline parts operating under excess pressure, categories 1 and 2:

Chemical, oil and gas processing equipment: steel equipment elements with a nominal diameter of 25 millimeters and more, working under vacuum: pipeline parts: bends , transitions, tees, crosses, flanges

Pipeline parts operating under excess pressure, categories 1 and 2:

Welded pipeline parts. Elbows for Ru from 10 to 100 MPa

Overpressure pipeline parts:

Pipeline parts steel seamless, welded, stamped, stamped, bent, turned, with nominal diameter up to 3000 mm, nominal pressure up to 100 MPa, operating at temperatures from -120 to +1650 ° C:

Equipment elements that can withstand pressure, seamless welded pipeline parts made of carbon, low-alloy, high-alloy and corrosion-resistant steel intended for liquids, gases and pa

Elements of equipment and pipeline parts connecting categories 1 and 2: steel flanges according to Appendix No. 1 on 1 sheet. For gases and vapors of working media of group 1 with a nominal diameter of DN over 25 to 350

Category 1 and 2 pipeline parts, operating under positive pressure, 3D seamless welded bends with bending angles 30, 45, 60, 90, 180 degrees,

Steel pipeline parts welded, pressure-resistant of the first and second categories, intended for use with liquids and gases of groups 1 and 2:

Pipeline parts operating under positive pressure, categories 1 and 2 seamless welded from carbon, low-alloy , corrosion-resistant steel: bends

Pipeline parts 1 and 2 categories, seamless welded from carbon, low-alloy, corrosion-resistant steel:

Details of connecting pipelines and fittings: valve flanges, pipeline connecting parts: (GOST 33259-2015), flat welded flanges, butt-welded flanges, free flanges on the welded ring, pipe parts

Pipeline designed for vapors and used for working environments of group 2, T7 (pipeline for communication with the existing part, high pressure pipeline, pipeline from the CHP manifold to the PRS ) s p

Elements (components), assembly units, assemblies, blocks, connecting parts, shaped products of industrial metal and technological steel pipelines and accessories (parts) for them, withstanding in

Steam pipeline from a steam collector 7 kgf cm² of a medium pressure part to a steam line to deaerators 6 ata high pressure parts, with a nominal diameter of 350, with a working pressure pair of 0.6 MPa and a steam tem

Elements and components of pipelines: flanges steel butt-welded, flanges of fittings, connecting parts of pipelines, steel free flanges on the welded ring, steel flat welded flanges, vessel flanges

Ball valves designed for use on pipelines and other equipment of field and gas collection points, gas distribution plants, underground gas storages, linear part of main gas pipelines, those

Elements of pipelines operating under overpressure, category 3, intended for working environments of group 1: connecting parts with a diameter up to Dн 1200 mm inclusive for main and field pipelines

Flanges (fittings for pipeline, connecting parts and pipelines, wellhead equipment, steel threaded),

Low-voltage complete cabinet devices (as part of the automatic control system of the installation for adding additives to oil pipelines and oil product pipelines

Elements of pipelines operating under excess pressure of categories 1 and 2: Parts and assembly units of steam and hot water pipelines of thermal stations of 1 - 4 categories: bent bends, bends, sector bends, tees, n

Gas control and shut-off valves: ball valves installed on pipelines of field, gas gathering points, linear part of main gas pipelines

Elements of pipelines of 1 and 2 categories, operating under excess pressure: flanges of fittings, connecting parts and pipelines

Oilfield equipment brand Plant TEK: Connecting parts for main oil and gas pipelines for operating pressure up to 9.8 MPa and field pipelines for operating pressure up to 31.4 MPa TU 1469-001-364300

Welded parts of pipelines (transitions, bends, tees) type TC for heating networks and water pipelines, bellows compensating devices and supports fixed type NOP, working under pressure up to 2.5 MPa, diameter up to 142

Pipeline fittings of the KVANT trademark, types: Check valves with accessories and spare parts

Equipment operating under excessive pressure: pipelines as part of complexes for draining and loading liquefied gases SGSN categories 1 and 2, used for working media of group 1, nominal dia.

Elements overpressure equipment of categories 1 and 2, used for working environments of groups 1 and 2: parts and assembly units of pipeline elements

Elements for equipment operating under overpressure: Welded connecting parts for pipelines for equipment of 1 (2) category operating under overpressure up to 20 MPa with a diameter of more than 25 mm

Seamless welded parts of pipelines from carbon and low-alloy steel according to application

Units and parts of technological pipelines under pressure up to 10 MPa, operating under excess pressure,

Assembly units and parts of pipelines connecting steel: transitions, tees, flanges, bends

Parts and elements of pipelines that can withstand pressure

Parts and elements of pipelines operating under excess pressure: steel pipes and fittings with thermal insulation made of polyurethane foam with a protective sheath, type MOEK: polyurethane foam pipes, pipes reinforced w

Pipeline steel parts, category 3:

Connecting parts and assemblies for technological pipelines:

Connecting parts of pipelines with a nominal diameter of over 100 mm,

Connecting parts of pipelines, operating under excess pressure, 3 categories, working environments of groups 1 and 2

Component parts for equipment elements (assembly units) of pipelines of category 3

Process pipelines of the 3rd category, withstanding pressure over 0.05 MPa up to 63.0 MPa and used for piping equipment as part of the modular compressor station MKS,

Fittings flanges, of fabric parts and pipelines:

Technological pipeline as part of the 35-11 / 300 unit:

Elements of equipment, connecting parts: bends, transitions, tees, plugs, transition rings for process pipelines with a nominal diameter of 40 to 1200 mm, with a maximum permissible working pressure s

Installation for washing and cleaning parts of pipeline fittings,

Technological pipelines as part of (within) technological blocks of BT type, with a maximum permissible working pressure over 0.05 to 50.0 MPa, nominal diameters over 100 to 1000 mm, medium gas (dissolved

Parts and assembly units of steam and hot water pipelines of thermal power plants: bent bends, type "OG",

Reduced steam pipelines as part of the ROU-801 steam reduction and cooling unit with a maximum allowable working pressure of 1.2 MPa, nominal diameter up to 400 mm, designed for gas and used for work

Flanges of fittings, fittings and pipelines, nominal diameter over 100 mm, nominal pressure over 0.05 to 25.0 MPa, medium gas, steam, component parts of equipment of 3 and 4 categories in accordance with annex

Connecting parts of pipelines up to PN 32 MPa -

Connecting parts for pipelines, category 3: transitions, plugs, flanges, bosses, plugs

Industrial pipeline fittings: drain devices with three degrees of protection, type ГГ1354.00.00.000А with a nominal diameter of 200 mm and a maximum allowable working pressure over 0.05 to 0.5 MPa, used as part of

Elements of pipelines and fittings, component parts of equipment of I and II categories for working media (liquid, gas) of groups 1 and 2 - Flanges, steel plugs: Flanges for vessels and apparatus with nominal diameter up

Connecting parts and nodes for technological, trunk and field pipelines of category 3

PIPELINE (transfer header of live steam, part of 90 atm in the area of ​​boilers 3, 3A and up to BROU-2, BROU-3 with operating parameters: medium - steam of group 2, pressure - 9.7 MPa, temperature Wednesday - 540 ° C.

Parts operating under overpressure, category 3 and intended for operation with gases and vapors of group 1: flanges of valves, fittings and pipelines with a diameter of up to 4000 mm types: 01 (steel flange

Pressure-Resistant Equipment: Parts and assembly units of pipelines,

Items of equipment that can withstand pressure: parts of connecting pipelines of category 3, with a diameter of more than 100 mm to 1420 mm and with a maximum allowable working pressure from 1.0 to 32 MPa, designed

Category 3 steam pipeline (according to TR CU 0322013) as part of a reduction and cooling unit (steam reduction ROU-10040),

Items of equipment that can withstand pressure: parts of connecting pipelines of category 3 types according to the Appendix (forms No. 0374756, 0374757), intended f for gases, vapors and used for work

Parts and elements of pipelines operating under excessive pressure yem, DN up to 1420 mm, PN from 0.05 MPa to 32 MPa,

Pipeline elements that can withstand pressure: flow parts of flow sensors of DRS types (I), DRS.3 (I), DRS.ZL (I) category 3, with a nominal diameter of more than 100 mm to 1000 mm, with a maximum allowable working

Connecting parts and units of main and field pipelines: head of a blowing candle

Parts and elements of pipelines:

Units and parts for technological devices and pipelines