Russian export of polyethylene caps:
Manufacturers of Russian polyethylene caps wholesale:
polyethylene caps manufacturing companies you many buy this products:
Polymer closures: Polyethylene caps: Closures made of polymeric materials: POLYETHYLENE LID for canning in glass jars, cap. 0.5-3.0 l. POLYETHYLENE COVER for closing the stack
Polymer closure means: polypropylene milk caps, polypropylene canning caps, cold-closing polyethylene caps
POLYMER CLOSING MEANS: cylindrical polyethylene cap-cap for bottles with acetic acid and wine
Means for closures made of painted and unpainted polymeric materials with a sealing gasket: a polyethylene cap on a 12-19 liter bottle, a screw cap with perforation with a diameter of 28 mm, and 48 mm
THREE-COMPONENT POLYETHYLENE CAP FOR BOTTLES FROM POLYETHYLENE TEREPHTHALATE AND POLYCARBONATE
Polymer closure: type II polyethylene cap (HDPE) for sealing polyethylene terephthalate bottles with food and non-food products
Polymer closures: polyethylene caps for food products
Polymer closures: polyethylene caps and stoppers (HDPE, LDPE) intended for contact with food
Polymer closure means: polyethylene caps with perforation "AB1881-120K", "AB1881-24K" without seals for sealing PET bottles with carbonated and non-carbonated drinks, min
Closures for bottles with food liquids made of unpainted polyethylene - caps type II, type IV
Polymer closures - polyethylene caps
Closures: polyethylene caps (dyed and unpainted) for sealing containers with food
POLYMER CAPACITIES: POLYETHYLENE CAP IV with a tear-off strip FOR SEALING BOTTLES WITH DRINKING WATER WITH A CAPACITY OF 12 L. and 19 l.
Polyethylene caps for canning (type II) and closing
Polymer closures for food products: polyethylene caps
Combined closures for food products: polyethylene caps
Polymer closures for food products: polyethylene caps,
Polymer closures for food products : polyethylene caps, Ecoplast Holding trademark
Polymer closures for food products: polyethylene caps,
Closing means made of polyethylene (for sealing bottles and bottles made of polyethylene terephthalate with food products): type II caps (for bottles with a capacity of 11 l -19 l), caps type II (for bottles we will
Means for capping tm. Plast-M: polyethylene corks for capping drinking water bottles with a capacity of 12 liters. - 20 liters. with a tear-off belt; handle, polyethylene lid for sealing bottles with drinking water vme
Household products, Klever trademark: disposable products: polyethylene gloves, protective masks, polyethylene peignoirs, aprons, shoe covers, shower caps, caps made of nonwoven fabric,
polymer closures for food products: -type IIa polypropylene closure caps and type IIa polyethylene closures; - plastic caps with plastic caps, screw with a safety ring, intended for
Bakery products from wheat flour in the assortment according to Appendix No. 1 (sheet 1), packed in polyethylene, polyethylene shrink wrap, polyethylene-coated paper, bags made of polymeric materials and caps
Frozen mushrooms, mushrooms, boletus, chanterelles, champignons, honey agarics, boletus, morel cap, in polyethylene bags, in cardboard boxes with a polyethylene liner, or polyethylene trays weighing from 0.3
POLYMER CAPACITIES (polyethylene, polypropylene): BEADS, CAPS, COVERS, FLIP-TOP CAP
Polymer closures - screw caps, screw caps with a safety ring (materials - polyethylene, polypropylene), marked "ALPLA", for plastic containers with food (milk, dairy
Sealing means: Screw caps made of polyethylene, painted and unpainted including two-piece caps for PUR-PAK packaging
Polymer closures: - screw caps polyethylene with perforation type I; - closure cap, three-component type II
Polymer closures made of polyethylene (for food containers): - type II cap-cork, for PET bottles with a capacity of 11, 0 l to 19.0 l; - cap type II, screw, for b
Consumer polymer containers: shaped bottles made of polyethylene with a screw cap with a capacity of 0.3 dm³ and 0.5 dm³; jars and buckets made of polypropylene with a screw cap with a capacity of 0.5 dm³, 1.0 dm³, 2.0 d
Polymer closures (polyethylene, polypropylene) for perfumery and cosmetic products: caps, lids, flip-top caps,
Polymer closures for food products: caps made of polyethylene and polypropylene, SAFE CAP.
Household products made of polyethylene, incl. disposable: peignoirs, capes, aprons, sheets, pants for pressotherapy, shower caps, highlighting caps, oversleeves, shoe covers,
Packaging from polymeric materials: bottles (with a capacity of 0.05-19.0 liters), from polyethylene terephthalate (PET), painted and unpainted, including complete with caps made of polyethylene (HDPE, LDPE) for food
polymer closure for contact with food products: three-component cap-stopper (type IV) made of polyethylene for sealing polyethylene terephthalate and polycarbonate bottles.
Polymer closures for food products: Three-component cap-cork (type IV) on polyethylene for sealing polyethylene terephthalate and polycarbonate bottles
Polymer closures: caps made of (polyethylene terephthalate, polyvinyl chloride, polyethylene, polypropylene) for industrial products and destination,
Best friend ectostop solution for external use to combat ectoparasites in dogs and cats. Packing 0.5; 0.75; 1.5; 3.0 ml in a polyethylene pipette tube, or 15 ml polyethylene bottles with a dropper cap.
Combined closures for alcoholic beverages: screw caps with a dosing device (type V) made of polyethylene with a seal made of polyethylene foam and with an aluminum top, commercial
Polyethylene closures for food: screw caps with a safety ring without a sealing gasket for bottles and cans with a neck diameter of 36 mm, 43 mm, 46 mm vs 56 mm; screw covers d
Means for closures polymeric made of polypropylene and polyethylene (lids, corks, caps), including painted ones, for sealing food and perfumery and cosmetic products, household chemicals and paints and varnishes
Consumer packaging made of polymer material: bottles made of colored and uncolored polyethylene terephthalate with a nominal capacity of 8 dm3 with corks and caps marked CKA-KLIN for packaging food liquids
SEALING AGENTS: CAP made of low pressure polyethylene, one-component screw for sealing polymer bottles with a neck 28 mm, 38 mm, 48 mm
Consumer packaging made of polyethylene terephthalate with plastic screw caps, for food liquids: bottles with a capacity of 0.5; 0.7; 1.0; 1.5; 2.0 l; bottles with plastic handles, 3.0 and 5.0 liters, colorless
Low-density polyethylene (HDPE) closures: screw caps
Polymer closure means - one-component polyethylene screw caps (type II) with a safety ring without a sealing gasket for sealing containers with food liquids
Polyethylene Screw Cap
Dried mushrooms , boletus mushrooms, mushrooms, chanterelles, morel cap) packed in polypropylene bags with a cardboard label or in cardboard boxes rods with a polyethylene liner, weighing from 0.03 kg to
Combined closures: aluminum screw caps with perforation, with sealing gasket (made of foamed polyethylene) and sealing paste (compound) for packing food products (carbonated and
Bottles made of polyethylene terephthalate, curly painted and unpainted with a screw cap,
Bottles made of polyethylene terephthalate, colorless with plastic screw caps, for food soft drinks, types: I-cylindrical and III-shaped, with a capacity of 0.5 liters; 1.0 l; 1.4 l; 1.5 l; 2.0 l; 2.5 l.
polymer closures: screw caps made of colored polyethylene for PET bottles
Polymer closures: two-component caps non-screw TU 38/37 3T MIB for sealing packaging made of polyethylene terephthalate (PET) in contact with water, juices, including for baby food
Polymeric packaging: Laminated polyethylene tubes with bushon caps for packaging cosmetic products
Polymeric packaging for food products: bottles made of polyethylene terephthalate with a nominal capacity of 0.500; 1,000; 1,500; 2,000; 3,000; 4,000; 5,000 cubic decimetres, cylindrical with screw cap, single use
Closing means: corks and caps made of polypropylene and polyethylene
Bottles made of polyethylene terephthalate with plastic screw caps, colorless and white, for milk and dairy products, with a capacity of 0.7 liters, type I (cylindrical).
Bottles made of polyethylene terephthalate, shaped with a screw cap (colorless, blue) (BT Sh-1) with a capacity of 0.6 l; 1.5 l; 5.0 l for bottling drinking, mineral water and soft drinks
Polymer closures made of polyethylene terephthalate: PET caps, articles SpK-1919K; SpK-1919K (S), intended for food products, trade mark "Sp"
Yogurt with drinking mango. Mass fraction of fat 1.5% Yogurt with lime and lemon drinking. Mass fraction of fat 1.5% LANDLIBE® trademark. Packaging: a bottle made of polyethylene terephthalate, sealed with a cap with an
Polymeric packaging for food products: shaped bottles made of polyethylene terephthalate with screw caps with a nominal capacity of 0.26 l and 0.28 l
Polymer closure means: polyethylene corks, intended for capping champagne, sparkling and sparkling wines, vinegar, still wines, with the marking LLC Polymersnab
Food flavoring Grilled beef 10.06. 107 (+ caps). Packaging - food-grade polyethylene cans, sealed with lids, net weight from 1 kg to 25 kg.
Polymer closures made of polyethylene and polypropylene, screw and non-screw, intended for sealing food products marked EDELWEISS 4: lids, dispensers-restrictors, valves, caps.
Polymer closures for food products: floor caps styrene (PS), polyethylene terephthalate (PET), polypropylene (PP), with the marking of the transport packaging Interplastic-YUG
Disposable polymer consumer packaging made of polypropylene and polyethylene, dyed and unpainted, decorated with offset printing and IML-label, complete with closures (caps
Disposable polymer consumer packaging made of polypropylene and polyethylene, dyed and unpainted, decorated with offset printing and IML-label, complete with closures (caps
Bottles made of polyethylene terephthalate, shaped, with a screw cap, colorless for food liquids
Consumer polymer containers for perfumery and cosmetic products and household chemicals: shaped and cylindrical bottles made of high density polyethylene with capping agents with a capacity of 0.25 cubic dm, 0.4 cu
Closing means of the M. PET trademark made of polyethylene and polypropylene packaging of bottles, cans: lids, caps, corks
Polymer closures for food and perfumery and cosmetic products: lids and caps made of colored and unpainted polyethylene and polypropylene
SEALING MEANS intended for contact with food products: circulation corks made of polyethylene (Type I), expeditionary (Type II), nipple (Type III), combined (Type IV A) for capping bottles with rims
POLYMER CAPACITIES (polypropylene, polyethylene). Type (kind) of products - corks, lids, caps, dosing devices.
Polymer (polyethylene) closures - lids, corks, caps for sealing glass containers with food, perfumery and cosmetic products and household chemicals
Polyethylene caps for bottle capping
Preforms (capsules) made of polyethylene terephthalate with polyethylene caps with perforation 15.0 g, 16.5 g, 25.0 g, 30.0 g, 33.0 g
PET preforms made of polyethylene tereflat and polyethylene caps with perforation
1) PET preforms (capsules): 25g; 30g; 45g; 95g; 135g; 690g. 2) Polyethylene caps: 3.0g; 5.0g; 11,0g.
Closing polyethylene caps
Polyethylene caps
PET preforms, polyethylene film, caps
Caps (lids) and handles made of polyethylene for closing PET bottles.
Bottles made of polyethylene with a cap of 250 cc
PET preforms made of polyethylene terephthalate and PET caps with perforation
1) SAP paper for the production of sanitary napkins (sanitary and hygienic products made of paper) 2) Plastic closure caps 3) Labels (polyethylene tape with a sticky layer )
PET capsules and caps made of polyethylene
1. Plastic sealing cap 2. Polyethylene sealing plugs
Preforms from polyethylene terephthalate and PET caps with perforation
Drinking water "Narach". non-carbonated oxygenated. Type of packaging: bottle made of polyethylene terephthalate, sealed with a polymer cap.
Means for closures: Polyethylene caps for bottle sealing, painted
Polymer closures: polyethylene caps
Means for closures made of polyethylene: dispensing cap, cork-lid, cap-lid, bottle handles according to GOST R 51214-98
We have large supplier & product base, Buyer safety measures, Best prices Logistics & quality inspection support, bulk Request for quote
Export to city | Date | Km |
---|---|---|
Hrodna (Belarus) - Gəncə (Azerbaijan) | 07.2020 | 2216 |
Tashkent (Uzbekistan) - Regensburg (Germany) | 07.2020 | 4455 |
Minsk (Belarus) - Khiwa (Uzbekistan) | 07.2020 | 2788 |
Homyel’ (Belarus) - Khorugh (Tajikistan) | 07.2020 | 3536 |