Threaded Upsetting Pipe from Russia

Oilfield equipment, exploration drilling: drill pipes, type 1 - with upset ends and couplings to them (B, VP), type 2 - with upset ends and couplings to them (H , NP), type 3 - with upset

Oilfield equipment, drilling geological exploration: Steel pipes: casing, upset drilling, pump-compressor

Geological exploration drilling equipment: drill pipes with welded-on tool joints, seamless; with external, internal and combined upsetting of the ends; nominal diameter from 60 to 140 mm; with a nominal wall thickness f

Equipment for oil and gas field, drilling exploration: Drill pipes with welded joints, seamless; with external, internal and combined upsetting of the ends; nominal diameter from 60 to 140 mm; with a par then

Drill pipes with upset ends

Forging and pressing machines: Installation for upsetting drill pipes model UVT-1

Central locking cone elevator, type KMK-M-150 for drill pipes with a conical upset of 18º with a diameter of 60 to 127 mm

Couplings for casing and tubing pipes: - couplings for casing pipes with a short triangular thread, 158mm - 228mm long, nominal diameter pipes 114mm - 508mm; - couplings for casing pipes with extended triangular thread

Geological exploration drilling equipment: threaded subs for drill pipes, tubing, casing; threaded nozzles for drilling, tubing, casing; drill threaded pipes, pump-compressor

Oilfield equipment, drilling geological exploration: Subs for drill strings, subs for tubing pipes, subs for casing pipes, subs for casing pipes with tooling thread, lane

Oilfield equipment, drilling geological exploration: electric-welded pipe, galvanized pipe with threaded ends, article 1266534

Sewing hats made of wool yarn fabrics, from fabrics from synthetic threads, from synthetic pile threads on a knitted basis (fleece) for men and women: hats, caps-pipes, balaclavas, headbands

Equipment for oil and gas field, drilling and exploration: Subs from the tool thread to the thread of casing pipes, diameter 23-508 mm

High Pressure Taper Upsetting Press

Magnetoluminescent test stand for threaded pipe ends MLK-KT

Pump-compressor pipes and couplings m, casing pipes and couplings for them, tubing pipes, casing pipes, tubing subs, casing subs with diameters less than 168.3 mm, diameters from 1

Pipe catchers for liquidation of accidents in oil and gas wells, Pipe catchers for liquidation of accidents at oil and gas wells: OV, OVT, OK and OKT pipe catchers, OVT, OK and OKT types (Overshots), Internal pipe catche

Couplings for casing pipes, outer diameter of couplings from 127 mm to 376 mm inclusive, version: A and B, type: normal and special, type of connection: short triangular thread, U, OTTM, OTTG; strength classes: D, E, K,

Subs and branch pipes with OCTG threads

Sanfor sewer pipe cleaner ® gel (or Sanfor® for pipes , or Sanfor® for pipes ), 5+ ® WC + PIPES

Geological exploration drilling equipment: Welded locks for drill pipes, outer diameter (86-190 millimeters) with a bore diameter (32-102 millimeters) with left and right locking threads, with straight and tapered

Oilfield equipment: Seamless steel casing pipes and couplings for them with increased operational reliability with threaded connection, Buttress type:

Oilfield equipment: Suspended branch pipes of PP, PT, PMM, PTM artificial fibers and threads, womens: trousers,

Control cables of the KUVF brand with an air pipe, conductive conductors twisted around it with fluoropolymer insulation, in a common screen, with a load-carrying element made of SVM threads, with an outer sheath of fluo

Shell-and-tube heat exchangers and pipe in a pipe types: TN, XN, KN, IN, TK, HK, KK, IK, INT, IKT, IPT, KVN, KVK, TP, KhP, KP, TU, TPK, IP, IU and pipe-in-pipe heat exchangers of the TT type, designed for gases and use

Oilfield equipment: casing pipes and couplings for them with threaded connections TPKh VG1, TPKh VG2,

Metal-working equipment: Installation for phosphating of threaded pipe ends,

Oilfield and exploration drilling equipment: seamless steel pipes and couplings for them of increased operational reliability with a threaded connection of the Buttress type

Lubricating grease of the NPO ReaSib LLC trademark: pipe thread lubricant with article RS-220

Garter and scarf sewing for adults from cotton, woolen, linen, silk fabrics, from fabrics from artificial, synthetic and mixed threads: snood type scarves, pipe type

Industrial piping fittings: Valves steel, flanged, butt-welded, threaded and butt-welded, cast iron, brass, Check valves, Cast steel cast check valves,

Hats for adults made of acrylic, wool, fleece: hats, cap-pipe, pipe-mask, windproof mask, pipe - bandana, balaclava, bandage, headband with ears

Profiled pipes for heat exchangers: profile twisted pipes ( HTP) and profile pipes with circular knurling (PKT)

Parts and elements of pipelines operating under excess pressure: steel pipes and fittings with thermal insulation made of polyurethane foam with a protective sheath, type MOEK: polyurethane foam pipes, pipes reinforced w

Pipe elements for steam boilers, hot water boilers , steam-water boilers and waste heat boilers of the 3rd and 4th categories: connecting pipes within the boiler, collectors (chambers), pipe heating surfaces (screens, sc

Equipment for gas-flame processing of metals and metallization of products: mechanized line for cleaning pipes from scale and contamination on the outside of the pipes; mechanized line for cleaning pipes from scale and c

​​BISCUITS FAVORABLE: CAKE-POPE WITH CHOCOLATE CRAWL, CAKE-POPE WITH DRAGE, CAKE-POPS WITH COLORED SPRING, CUKURUKU, KANTUCHCHINE, AQUERIQUE, PIPE, PIPE, PIPE MARDLIN CARKOVNOE, S

Demountable pipe cutters for pipes, models: Р5950, Р5936, Р5937, Р5957, Р5958, Р5924 , Р5925, Р5969, Р5992, Р5970, Р5928, Р5971, Р59117, Р5972, Р5964 and one-piece pipe cutters, models: Р5919М, Р5933М, Р5977, Р5978, Р598

Equipment for oil and gas production, drilling and exploration: Equipment for the development and repair of oil wells: Tubing pipes and couplings for them, casing pipes and couplings for them, branch pipes, subs

Oilfield equipment: Internal pipe-catcher, type TV; Internal loosening pipe catcher, type TVS; Outside loosening pipe catcher, type TNS

Equipment oilfield: Branch pipes and subs of tubing and drill pipes, types PP, PT, PMM, PD, P, N, N, branch pipes for air defense

Items of equipment operating under overpressure of 1 and 2 categories for working environments of groups 1 and 2, types: pipes and fittings: bends, bends in two-pipe design; transitions, transition elements in a two-pipe

Metal-working machines for cutting holes in pipes and processing pipes for mating with a pipe,

Oilfield equipment, drilling geological exploration: Electric-welded steel pipes, Longitudinal welded steel pipes, Rectangular electric-welded steel pipes, Steel bent closed welded profile

Oilfield equipment: Tubing pipes, LNKT; Clutchless drill pipes, LBT BZ; Clutchless casing pipes, LOT

Oilfield equipment: integral pipes of the TI type, pipes and manifold pipes of the PM and TM type

Machine tools metal-working: split pipe cutters, models: Р5950, Р5936, Р5957, Р5958, Р5924, Р5925, Р5969, Р5992, Р5970, Р5928, Р5971, Р59117, Р5972, Р5964 and one-piece pipe cutters, models: Р5919М, Р593378, Р5977, 17119

" Casing pipes and core pipes and nipples to them "

Elements of pipe heating surfaces, connecting pipes within the boiler and header of steam and hot water boilers with overpressure exceeding 0.05 MPa, 1-4 hazard category

High-pressure bypass pipes, unit No. 3, main building, turbine compartment, diameter 377x70 mm, with a working pressure of 23.53 MPa, working medium - steam with a temperature of 540 ºС (group 2), 2- category of the pipe

Equipment operating under overpressure categories 1 and 2: shell-and-tube heat exchangers, tubular bundles for them, pipe-in-pipe heat exchangers , network water heaters, trade mark: "Altayvagon"

Chemical equipment: Heat exchangers of the "pipe in pipe" type single-flow and multi-flow steel welded

Heat exchangers pipe-in-pipe

Steam pipe (Steam pipe 1.6 MPa on ROU-1,2) working pressure 1.6 MPa, maximum d permissible diameter 219 mm, working medium - water vapor (group 2), temperature 300 ° С, pipeline category 1

SALTED AND SURVEY VEGETABLES IN THE ASSORTMENT: TRADITIONAL SALT CUCUMBERS, SALT PERFUME (ORLYAK), SALT PEPPER, SWEET SALT PEPPER, SALT PIPE BITTER, SALT PIPE, SALT TOMATOES, SALT TOMATOES cosmetic for hair care brand JO

Fishing taps for drill pipes and tubing, fishing bells for drill pipes

Links of pipes of road water supply starting reinforced concrete free-flow, I group in terms of carrying capacity and bearing capacity (brands of pipe links are indicated in Appendix No. 1 to this certificate of conformi

Equipment operating under positive pressure: shell-and-tube heat exchangers and heat exchangers "pipe in pipe "With a maximum allowable working pressure of up to 16.0 MPa, with a capacity of up to 50 m3, designed

Steam bypass pipes of HPC TA-4 made of seamless steel pipes with a diameter of 273x36 mm,

Pipes for road culverts. Spiral metal corrugated pipes

Items of equipment operating under excess pressure: elements of pipe heating surfaces , connecting pipes within the boiler and the collector of stationary steam and hot water boilers with a working pressure of up to 4.0

Heat exchangers brands "Oil and Gas Technologies" types: shell and tube, "pipe in pipe",

Hot reheat piping and steam piping to BROW SD , Verkhnetagilskaya GRES, with a nominal diameter of up to 600 mm, with a working pressure of 3.21 MPa, working medium - steam with a temperature of 568˚С (group

Pipe-in-pipe heat exchangers

Tube elements of heating surfaces (screens, screens, superheaters, economizers and others f pipe elements), connecting pipes within the boiler

Engine exhaust systems (pipes reception, main and additional mufflers with pipes) for VAZ 2101-2107, VAZ 2108-2112, VAZ 21213, VAZ 2113, VAZ 2115, VAZ 2123 Niva Chevrolet, VAZ 1117-1

Oilfield equipment: Welded locks for drill pipes, Locks for tubing pipes

Shell-and-tube heat exchangers, tube bundles for them and pipe-in-pipe heat exchangers

Heat exchange devices of types H, K, U, P, PK, PS, pipe-in-pipe heat exchangers TT types ТТОН, ТТОР, ТТМ, ТТРМ, tube bundles and assembly units for heat exchangers, pressure not exceeding 21 MPa, under vacuum (residual

Shell-and-tube heat exchangers, category 1,2, designed for liquids of groups 1, 2, with a pipe space capacity of 0.361 m³ and with a maximum permissible working pressure of the pipe space over 0.6 MPa

Piping piping for main and peak boilers, nominal diameter up to 1000 mm inclusive, working pressure 1.4 MPa, working medium - water, temperature 70-130 ° С, (working medium group 2), 1st category agree

Elements of pipe heating surfaces, pipes connecting within the boiler and the collectors of stationary boilers, with an overpressure of over 0.05 MPa, equipment of the 4th hazard category

Heat exchangers pipe-in-pipe

Column piping type OK, OKK, OKM, 6A.SN, 6A3.SN, 6AG.CH (PN up to 105 MPa), piping for water wells type OVS (PN up to 21 MPa), standard version, K 1, K 2, K 3 in accordance with GOST 13846-89

Chemical, oil and gas processing equipment: equipment for technological pipelines, installations for compensating loads on the tank wall from the inlet and outlet pipe (SKNR), tank pipes and hatches

Elements of pipe heating surfaces, pipes connecting within the boiler, collectors of steam and hot water boilers with overpressure over 0, 05 MPa, 1-4 hazard category.

Elements pipe heating surfaces, connecting pipes within the boiler, headers of steam and hot water boilers with overpressure over 0.05 MPa, 1-4 hazard category

Elements of pipe heating surfaces, connecting pipes within the boiler, collectors of steam and hot water boilers, with overpressure exceeding 0.05 MPa, 1-4 hazard category

Elements for equipment in operation under overpressure of 1 and 2 categories: elements of pipe heating surfaces, connecting pipes within the boiler and the collector of stationary boilers. Working pressure up to 28 MPa.

Industrial electrotechnical equipment: pipe slope installation, model LN-PP-SLP; input four-position roller table, model LN-R-IN4; pipe feed roller table, model LN-R-NDTIN; four-position output roller table,

Oil and gas field equipment, drilling exploration equipment: OKOP brand equipment for piping and casing (indicator pipes, couplings and centralizers),

Pipe elevators ET TU 3668-051-27005283-2011, Pipe spiders ST TU 3668-050-27005283-2011.

Elements of pipe heating surfaces, connecting pipes within the boiler, headers of steam and hot water boilers, with overpressure over 0.05 MPa, 1-4 hazard category.

Elements of stationary steam and hot water boilers, power boilers and waste heat boilers, operating under overpressure categories 1 and 2, types: pipe elements in pre-heating surfaces, connecting pipes 963055

Oil and gas field equipment, exploration drilling, casing pipe according to API 5 CT, seamless hot-deformed casing pipe 177.8 x 8.05 N80

Locks and connecting ends for drill pipes: subs for tubing pipes marked NITROGEN

Chemical equipment: pipe-in-pipe heat exchanger, multi-flow collapsible, Type: TNN-4.75. The products are manufactured in accordance with TR CU 0102011 On the safety of machinery and equipment.

Pipe-in-pipe heat exchangers

Pipe wrench, horizontal, reinforced KSTU, single-joint pipe KOT

Chemical, oil and gas processing equipment: Shell-and-tube heat exchangers, tube bundles for them and pipe-in-pipe heat exchangers

Shell-and-tube heat exchangers, tube bundles for them, pipe-in-pipe heat exchangers, network water heaters

Elements of pipe heating surfaces, connecting pipes within the boiler, collector of steam and hot water boilers with overpressure over 0.05 MPa , 1 - 4 hazard category

Pasta group A, premium. trademark GRANDdiPASTA: penne (Penne), Grandpenne (Grand pené), Canelone (Canelone), Abissini (Abyssinia), Tubetti (Tubetti), Farfalle (Farfalle), Pipe (Pipe), Cavatappi (Ka

Equipment oil and gas field, drilling geological exploration: Equipment for uniform supply of oil product to the reservoir model M, Hoisting pipe model TP, Hoisting pipe with float model TPSP, Receiving and distributing

Elements of pipe heating surfaces, connecting pipes within the boiler and collector of steam and hot water boilers with overpressure above 0.05 MPa, 1 - 4 hazard category

Chemical equipment: shell-and-tube heat exchangers, tube bundles for them and pipe-in-pipe heat exchangers such as TN, KhN, KN, IN, TK, KhK, KK, IK, INT, IKT, IPT, KVN, KVK, TP, KhP, KP, TU, TPK, IP, IU, TT. Products

CENTRALIZERS: Pump centralizer TsN-73; TsN-89; Pipe centralizer TsT-73; TsT-89; Roller pipe centralizer РЦТ-73; RCT-89; Centralizer of submersible electric motor CR-168, manufactured according to TU 3665-003-89509009-201

Elements of pipe heating surfaces, connecting pipes within the boiler and collectors of steam and hot water boilers with overpressure over 0.05 MPa, 1-4 hazard category

Elements of pipe heating surfaces, connecting pipes within the boiler, collectors of steam and hot water boilers with overpressure over 0.05 MPa, 1-4 hazard category

Elements of pipe heating surfaces, pipes connecting within the boiler, collectors of steam and hot water boilers with overpressure over 0, 05 MPa, 1-4 hazard category.

Elements of pipe heating surfaces, pipes connecting within the boiler, collectors of stationary steam and hot water boilers, energy technology boilers and boilers -retilizers, autonomous superheaters and economize

Oilfield equipment: pipes, couplings, brand NABEREZHNOCHELNINSKY PIPE PLANT

pressure-resistant piping elements, categories 1 and 2, intended for liquids and gases of groups 1 and 2: pipes with supports types L101 .00.000-L112.00.000, L204.00.000, L243.00.000-L247.00.000, L261.00.0

Oilfield equipment, drilling geological exploration: Casing pipes. Drill pipes and rods. HDD rods

Elements of pipelines operating under excess pressure, categories 1 and 2: permanent joints of polyethylene pipes with steel pipes for gas pipelines ,

steam pipe (steam pipe) to the boiler unit heaters station No. 8

Elements of pipe heating surfaces, connecting pipes within the boiler, collectors of steam and hot water boilers, with overpressure exceeding 0.05 MPa, 1-4 hazard category

Oilfield equipment, drilling geological exploration: Drilling tools: Drill pipes, type TBSU DIAMETER from 42mm to 73mm with locks, types Z-33, Z-63.5; Drill pipes type SBTM DIAMETER from 42mm to 89mm under twist

Steam pipe of the waste heat boiler Waelz-furnace complex No. 6, pipe diameter 159 mm, 219 mm, pressure 1.3 megapascals, from drum separator of the waste heat boiler of the 6th Waelz furnace complex to the pipeline unit

Elements of boilers operating under excess pressure, category 1: pipe elements of the heating surface : screens, screens, superheaters, economizers, connecting pipes within the boiler (lower, outlet, bypass

Steam pipeline to boiler installations No. 1,2,3 KTC-1. steam collector from TG No. 1, 2, 3. Pipe diameter 630 mm, 426 mm, pressure 1.5 MPa. From steam line, registration No. T-154 to steam pipe, registration No. 1084.

Oilfield equipment, drilling geological exploration: Single-joint pipe wrench KOT48-89, KOT80-132, chain wrench KTsN-1, KTsN-2, KTsN-3, KTsO-1, KTsO-2, KTsO- 3, pipe wrench models KTGU-M60, KTGU-M73, KTGU-M

Seamless hot-deformed steel pipes, diameter from 32mm to 273mm, 1.6 MPa, marking Chelyabinsk pipe rolling plant

Exhaust pipe from the PC at the outlet steam pipe of the reheater (boiler room), with a nominal diameter of up to 250 mm, maximum permissible operating pressure of 2.96 MPa , working environment - steam, temperature 567

Seamless steel pipes, diameter from 32mm to 273mm, 1.6 MPa, marking Ural pipe plant

Longitudinal electric-welded steel pipes, diameter from 32mm-273mm, 1.6 MPa, marking ROYAL PIPE PLANT

Oilfield equipment: Complex of sealing equipment, upgraded 1KGOM, corrosion-resistant K1, K2, K3: Box No. 1, Box No. 2, Box No. 3, Box No. 4 for pipes ф60, Box No. 4 for pipes Ф7

Drain pipe of the cold reheat steam pipe, with a maximum permissible operating pressure of 4.858 MPa, nominal diameter 65 mm , working environment - steam water (groups 2), temperature 327 ° С, 1st category pipelines

Pressure equipment: apparatus pipe-in-pipe heat exchangers

Hot water pipe from UTS-3 to UT22 in a two-pipe design with a nominal diameter of 530 mm

Chemical equipment: Shell-and-tube heat exchangers and pipe-in-pipe heat exchangers

Items of equipment that can withstand pressure: typical pipe elements (screens, screens, superheaters, economizers, collectors; connecting pipes within the boiler: downstream, outlet, bypass, sub

Oil and gas field, drilling and exploration equipment: - whisk valves for tubing pipes, - adapters for casing pipes, for tubing, for drilling columns; - adapters for combination

Pipes and pipe fittings made of thermosetting plastics reinforced with glass fiber, hazard categories 1 and 2, intended for the liquid environment of working group 2 with a nominal diameter of up to 600 mm and a maximum

TWO-LINE PIPE ELEVATORS FOR GRAPPING UNDER THE COUPLING OR LOCK AND HOLDING THE PUMP-COMPRESSOR OR DRILLING PIPE COLUMNS ON WEIGHT ..

Steam pipe, type: steam pipe 30 ata from ROU 14030

Heat exchangers pipe-in-pipe

Elements of pipe heating surfaces, connecting pipes within the boiler, collectors (chambers) of stationary steam and hot water boilers of the 3rd, 4th category types according to the appendix form No. 0236002

Heat exchangers pipe in pipe single-flow collapsible type TTOR, single-flow non-collapsible type TTON, multi-stream collapsible type TTM, collapsible small-sized type ТТРМ with working medium of group 1, 2 for gases

Upgraded pipe punches, Technical Regulations of the Customs Union TR TS 0102011 On the safety of machinery and equipment, Modernized pipe punches. Technical conditions TU 3668-026-50783875-2012

STEAM PIPE (main steam pipe of the boiler 7) with operating parameters: medium - steam of group 2, pressure - 13.7 MPa, medium temperature - 560 ° C.

Locks for drill pipes and technological locks for tubing pipes